Cylindrical grinding in Turkey for new shafts, rollers and piston rods up to approx. Ø600 × 4000 mm, with controlled diameter, runout, roughness and super-finishing.
One accountable teamCNC-Turkey manages international sales, engineering communication, production coordination, quality documentation and export operations. Manufacturing is carried out through an established machining infrastructure in Istanbul, Türkiye.
Dimensional and surface finishing on a new component
Approximate capacity
up to approx. Ø600 × 4000 mm
Manufacturing focus
new precision components
Acceptance basis
drawing and inspection plan
cylindrical grinding Turkey
For new shafts, rollers, piston rods and bearing surfaces, cylindrical grinding brings turning or heat-treatment allowance to final diameter, runout and roughness. Hard chrome and super-finish polishing can be linked into the same manufacturing plan where specified.
For new shafts, rollers, piston rods and bearing surfaces, cylindrical grinding brings turning or heat-treatment allowance to final diameter, runout and roughness. Hard chrome and super-finish polishing can be linked into the same manufacturing plan where specified.
✓Shaft bearing seats, piston rods, rollers and precision outside diameters
✓Final-size grinding after heat treatment or hard chrome
✓Controlled surface preparation before super-finish polishing
✓Surface grinding for plates, slideways and flat datum faces
Technical acceptance and order inputs
Diameter, total runout, cylindricity, roughness and grinding allowance are defined in one datum system.
✓Share the PDF drawing, STEP/STP, quantity and operating conditions.
✓Review geometry, hardness, stock allowance, workholding and inspection access.
✓Run controlled rough and finish passes tied to the specified datums.
✓Record final size, geometric tolerance and surface roughness.
Manufacturing
What we coordinate for your drawing
•Shaft bearing seats, piston rods, rollers and precision outside diameters
•Final-size grinding after heat treatment or hard chrome
•Controlled surface preparation before super-finish polishing
•Surface grinding for plates, slideways and flat datum faces
Project control
Clear technical responsibility for new component manufacturing
—The scope starts with manufacturing a new component from raw material or a semi-finished blank to an approved drawing.
—Diameter, total runout, cylindricity, roughness and grinding allowance are defined in one datum system.
—Drawing revision, process sequence and acceptance records are tracked through the order.
—Manufacturing, quality documentation and export delivery are managed as one CNC-Turkey project.
RFQ
From drawing review to export shipment
01
Share the PDF drawing, STEP/STP, quantity and operating conditions.
02
Review geometry, hardness, stock allowance, workholding and inspection access.
03
Run controlled rough and finish passes tied to the specified datums.
04
Record final size, geometric tolerance and surface roughness.
05
Complete delivery with approved documentation and protective packing.
Diameter, total runout, cylindricity, roughness and grinding allowance are defined in one datum system.
Does the stated cylindrical grinding maximum apply to every geometry?
No. Length, weight, workholding, shoulders, access, hardness and tolerance are reviewed together.
Can cylindrical grinding follow heat treatment?
Yes; hardness, distortion risk, remaining allowance and preservation of datums must be approved before order.
Can a cylindrical grinding inspection report be supplied?
Dimensional and surface results can be documented when characteristics and inspection method are agreed at quotation.
Can cylindrical grinding be included in a repeat-production route?
Yes. Once process sequence, stock allowance, datums and sampling plan are approved, batch inspection and documentation can be applied to new components.
RFQ
Send your drawing for a manufacturing review
Quantity, material, quality requirements and delivery country help us review the appropriate manufacturing and shipment route.
