Why was this job difficult?
Thin fins on small parts can flex easily during machining. Parts with a lot of material removed also tend to distort. Three points therefore mattered most on this job:
- ✓Thin fins
- ✓Distortion
- ✓Tolerance across the series
Project example · Europe
7075 Aluminium Electronics Housing and Cover for a European Customer
We machined a small finned electronics housing and its cover from 7075 aluminium in series, using a dedicated fixture for fast machining in a single setup.
One accountable teamCNC Turkey manages international sales, engineering communication, production planning, quality documentation and export operations. Our manufacturing network in Türkiye combines specialised processes; CNC Turkey is responsible for quotation, quality and delivery.
Sector and region
Electronics · Europe
Parts
Housing and cover
Material
7075 aluminium
Size
About 40 mm
Workholding
Custom 12-part fixture
Surface
Uncoated
Aluminium electronics housing project
The parts were small and the fins were thin. The hard part was preventing distortion and holding tolerance across the series. The customer name, part details and commercial terms are confidential and are not published.
Request a quote for a similar job
Share the drawing, 3D model, quantity, material and surface requirement.
No account needed · or by email: info@cnc-turkey.com
Fast machining in a single setup with a fixture
A custom fixture with 12 part positions was prepared for this job. The parts were machined in a single setup. This reduced machine loading, sped up production and held every part in the same position.
Why 7075 aluminium?
7075 is a high-strength aluminium alloy that machines well. It suits small parts that need a strong body at low weight.
Inspection and documentation
A quality report and measurement record were prepared for the parts. They are customer-specific and are not published here.
Real project photos
Finished parts
These photos come from this project.
Parts
Finned aluminium parts
The thin fins were CNC-machined.
Series production
Boxed batch
Finished parts laid out in a box.
3D model
12-part fixture
3D model of the fixture that holds the parts in a single setup.
Project film
Aluminium electronics housing project
The machine and part footage comes from this project. Thin fins are cut with a small tool and plenty of coolant. The custom fixture allows fast machining in a single setup.
Documentation
Documents we provide on this type of work
These images show a sample format and contain no project data. The actual reports for this project are customer-specific and are not published here.
Quality control report
Measurement record
RFQ
From drawing review to export shipment
01
Review of the drawing and 3D model
02
Preparation of a custom 12-part fixture
03
CNC milling in a single setup
04
Measurement and quality report
05
Protective packing and shipment
Continue your sourcing review
FAQ
Questions international buyers ask
Why do thin-finned aluminium parts distort?
When a lot of material is removed, internal stresses are released and the part can change shape. Thin walls also flex under cutting forces.
Do you make small aluminium parts in series?
Yes. On this project, small aluminium parts were machined in series. Share your drawing and quantity and we will review them.
Can you ship parts uncoated?
Yes. The parts on this project were shipped uncoated. The surface requirement follows the drawing.
RFQ
Send your drawing for a manufacturing review
Quantity, material, quality requirements and delivery country help us review the appropriate manufacturing and shipment route.
Request a quote for a similar job
No account needed.
Your drawings are kept confidential and used only for quotation.