Part and process scope
Prismatic bodies, fixtures, brackets, plates and complex milled components can be reviewed together with the drilling, thread, pocket and contour operations they require.
International CNC sourcing from Türkiye
CNC Milling Turkey for Custom Milled Parts
Drawing-based production assessment for prismatic and complex components through 3-, 4- and 5-axis network capacity.
One accountable teamCNC-Turkey manages international sales, engineering communication, production coordination, quality documentation and export operations. Manufacturing is carried out through an established machining infrastructure in Istanbul, Türkiye.
From the mill
Multi-axis milling for complex components
Manufacturing heritage
Since 1978
CNC turning
3-, 4- and 5-axis supplier-network capacity
CNC milling
Suitability assessed from the drawing
Export support
Europe, USA and Australia
CNC milling Turkey
For components requiring drilling, tapping, pocketing and contour machining, we review material, workholding, tolerance and finishing effects before quotation.
Upload Your Drawing for a Quote
PDF, STEP/STP, IGES/IGS, DXF, DWG and ZIP files are accepted.
No account needed · or by email: info@cnc-turkey.com
Planning from the drawing
Surface finish, geometric tolerances, post-heat-treatment machining and coating allowances are evaluated against the drawing. Grinding can be added to the production route where required.
Typical CNC milled component types
CNC milling is suitable for planar and prismatic geometries, free-form contours, hole patterns and complex fixture components. The following component types are commonly produced by CNC milling:
- ✓Machine bodies and housings — with precision mating surfaces and bolt-hole patterns
- ✓Brackets and structural carriers — high-strength steel or aluminium with lightening pockets
- ✓Fixture plates and setup components — precision location holes, surface flatness
- ✓Covers and plates with functional surfaces — seal-free sealing faces, threaded connections
Geometric tolerances in CNC milling
In milled parts, flatness, perpendicularity, parallelism and positional tolerances (GD&T) are evaluated against the drawing. Workholding method, part rigidity and material directly affect achievable geometric tolerances.
Surfaces with critical geometric tolerances should be highlighted at the quotation stage; surface grinding or post-hardening machining can be added to the production route where required.
Advantages of sourcing CNC milled parts from Turkey
Aluminium and steel milled parts enter Europe with zero tariff under the EU Customs Union. For prototype and low-volume orders, road freight to Europe in 3–6 days is possible; for urgent shipments, air freight in 3–5 days.
Quality documentation requirements for milled parts — EN 10204 3.1 material certificate, dimensional report, surface hardness certificate — are decided at the quotation stage. The same production process is carried through from prototype to series.
Manufacturing
What we coordinate for your drawing
- •CNC turning, milling and multi-task machining for suitable geometries
- •Prototype, low-volume, medium-series and repeat production
- •Coordination of material, heat treatment, grinding, coating and inspection services
- •Drawing-based review of tolerances, surface requirements and documentation
Sourcing
Clear accountability, not a workshop search
- —One team for international sales, technical communication, quality documentation and export
- —Manufacturing carried out through an established machining infrastructure in Istanbul
- —A route selected between group capability and a qualified supplier network for the part
- —Traceable project coordination from quotation through packing and shipment
Manufacturing equipment
Equipment used for turned and milled components
| Capacity category | Process | Suitable components / capability |
|---|---|---|
| CNC Milling Centres | 3- and 4-axis milling | Prismatic bodies, brackets, plates and milled components |
| Multi-Task Turn-Mill Centres | Turn-mill and angled operations | C/Y-axis, sub-spindle and single-setup options for complex rotational parts |
| 5-Axis Machining Centres | Multi-face and angled machining | Complex geometry and access requirements are assessed from the drawing |
Materials
Materials reviewed against your drawing and sourcing requirements
Carbon and engineering steels
C45 · C45E · S235 · S355JR · 41Cr4 · 42CrMo4 · 34CrNiMo6 · 20MnCr5 · 17CrNiMo6
Equivalency is checked against the drawing and material standard.
Tool steels
1.2714 · 1.2365 · 1.2367 · 1.2344 · 55NiCrMoV7
Heat-treatment condition and machinability are reviewed during quotation.
Stainless steels
1.4305 · 1.4404 · 1.4435 · 1.4122
Aluminium
EN AW-6060 · EN AW-6082 · 6060 T66 · 6082 T6
Other alloys are subject to drawing review and availability.
RFQ
From drawing review to export shipment
01
Share the drawing and CAD file
02
Review manufacturability, material and critical requirements
03
Confirm material, quantity and quality requirements
04
Receive a quotation with lead time and delivery terms
05
Agree the sample or first-article approach where required
06
Production and process coordination
07
Inspection, documentation and packing
08
Export shipment and delivery follow-up
Continue your sourcing review
FAQ
Questions international buyers ask
Which files can I send for a quotation?
You can send PDF drawings, STEP/STP, IGES/IGS, DXF, DWG and ZIP files, together with quantity, material, critical tolerances and delivery country.
Can material certificates be supplied?
EN 10204 3.1 material certificates can be supplied when requested and agreed during quotation. Source, form, dimensions and purchase conditions affect availability.
What if CMM inspection or a detailed dimensional report is required?
Dimensional inspection uses suitable conventional measuring equipment. Where CMM inspection, detailed dimensional reports or third-party verification are required, these services can be coordinated through a qualified measurement network.
How quickly will I get a first response?
We typically send the first technical response to your enquiry within 2 business days.
Which Incoterms do you support?
EXW, FCA Istanbul, DAP and CIF/CFR (sea freight) are supported; the exact Incoterm is agreed during quotation.
RFQ
Send your drawing for a manufacturing review
Quantity, material, quality requirements and delivery country help us review the appropriate manufacturing and shipment route.
Upload Your Drawing for a Quote
No account needed.
Your drawings are kept confidential and used only for quotation.